ATALAY 8 FULL AUTOMATIC EDGE BANDING MACHINE

Pre-milling unit; Chipboard, MDF and so on. It cleans the surface of the material to be coated with razor blades to make the possible defects in the surface perfect, the bonding quality is more robust and aesthetic appearance.

The bonding unit; cuts and sticks PVC, Foil, melamine and ABS tape excessively. The glue pot is 2.5Kg in capacity and becomes ready in 15 minutes.

Front-end cutting unit;Cuts excess pvc in the head and tail of the panel material.

The unit works with a linear slide system. Saws can be angled 0-7 degrees.

Milling unit; The pvc cleans the bottom and top of the material radically. The disc tracking system makes precise milling and does not create scratches on glossy surfaces

It can be precisely adjusted by measuring indicators which lift the problem of adjustment in the way of 0,40mm den 2mm passes.

Corner rounding unit; Postforming, Softforming, flat parts and length covers round off the corners.

The solution spraying unit; polishes the Pvc material by dissolving the glue residues on the material

The Radius scraping unit picks up the remaining surplus and the traces that the milling blades have made on the pvc, the disk tracker and the mount.

The pneumatic glue scraping unit;Cleans excess glue between PVC and flakeboard. the unit works with the help of pneumatic printing.

The hot air blowing unit; removes the color change problems that occur in dark pvc.

The buffing unit; polishes the pvc surface by taking the glue residues with cotton brushes.

Jumping grooving saw unit; 4 or 8 mm backing groove can be opened on the chipboard or Mdf surface. The groove opening unit has the jumping feature.

The height is automatically adjusted on the machine.

With the 10 "touch screen you can operate all the machines.

You can follow the malfunctions and alarms of your machine from the screen.

The machine is equipped with high safety systems that protect the operator and workpieces.

Ergonomic control panel provides more convenient operation.

The machine is PLC controlled.

The machine runs at a speed of 13 mt./min. the carrier pallet is a wide pallet system moving on the shaft, the presser wheels compressing the workpiece are roller bearings,

Machine CE certified